2.4 GHz Antennas (Bluetooth, ZigBee, WiFi)

AGS069 has a 2dBi gain and IP67 waterproof housing. AGS069 with cable lengths of 1 metre and 3 metres and with SMA male connector are available in stock.

Various options are available for connectors (SMA, MMCX, MCX, others) and RG174 cable length (3m, 5m, others).

GL8/25-9 is a 2.4GHz as well as a penta band 3G/GSM yagi antenna with a 9dBi gain (806-2500MHz). GL8/25-9 with 5 or 10 metre low loss LMR200 coaxial cable and SMA male connector are available in stock.

Various options are available for connectors (SMA, FME, MMCX, MCX, others) and cable length.

The Acara is a internal PCB antenna covering the 2.4 frequency band.

It is a ground plane independent design suitable for either mobile or fixed applications.

The antenna is available in stock in various cable and connector configurations.

Check datasheet or table below for various part number ordering options.

The Rhea is a groundplane independent dual band 2.4/5.8 GHz internal antenna and is supplied with various cable and connector options. Enabling connectivity to both 2.4 and 5.8 GHz wireless LAN bands, the Rhea is a compact solution for internal antenna applications. This antenna is available in stock.

Check datasheet or table below for various part number ordering options.

The BT-Stubby is a 2.4 GHz stubby antenna design for wireless device applications including portable and fixed units.

It is a cost-effective 2.4 GHz solution and comes with a SMA-Male connector.

The BT-Stubby is available in straight or right-angle versions. A straight version with RP-SMA connector is a also available.

Check datasheet or table below for various part number ordering options.

The BT-ComPact is a compact 2.4 GHz Helical antenna with either a SMA-Male or a MMCX Straight connector.

Designed for mating to MMCX receptacles on the PCB boards, the MMCX version lends itself well to fixed 2.4 GHz deployments such as Zigbee applications. The SMA-Male version is designed for terminals where antenna should be externally mounted onto a SMA-Female connector.

Check datasheet or table below for various part number ordering options.

The BKR2400 is a 1/2 wave dipole with a SMA-Male knuckle operating at 2.4 GHz. This is an ideal product for WLAN, Zigbee and Bluetooth applications where a groundplane or a proximity groundplane is not available. The BKR2400 is often used on WLAN terminals, routers and access points and offers 2 dBi of gain. Also available for Wi-Fi equipment: BKR2400 with RP-SMA connector (part number: FBKR35068-RS-KR)

Check datasheet or table below for various part number ordering options.

The BT-Blade is a waterproof blade antenna covering the 2.4 GHz frequency band. It is a ground plane independent design and has a waterproof cover to make the antenna more durable. This makes it ideal for discrete fixed or mobile applications.

The antenna is available in various cable and connector configurations.

Check datasheet or table below for various part number ordering options.

The C-Blade is a cost-effective, fixed mount 2.4 GHz antenna designed to support WLAN and Bluetooth applications. It is a similar design to the popular BT-Blade antenna, but has a mounting tab for flexible mount options. The C-Blade can also be supplied in a white finish for applications requiring a cost-effective 2.4 GHz ceiling-mount antenna. The C-Blade is a groundplane independent, omni-directional antenna offering good gain and efficiency.

The C-Blade comes in various cable/connector configurations.

Check datasheet or table below for various part number ordering options.

The CPW is a tough and durable 2.4 and 4.9-6.0 GHz puck antenna with approx 3 dBi gain. The antenna is a screw-mount antenna requiring a 20mm drill hole. The cable exit is on the underside of the antenna and once mounted is totally enclosed, secure and waterproof. The antenna is secured in place by a nut that is tightened from underneath. The CPW is ideal for Wireless LAN and Zigbee applications where a discrete antenna is required, but performance cannot be compromised. A cellular version (CPT) and GSM (CPO) version of this antenna are also available.

Check datasheet or table below for various part number ordering options.

The Z-Top is a very low profile 2.4 GHz external antenna with an SMA-Female BLK connector underneath. It measures approximately 80mm in diameter and approx 13mm in height, offers an omni-directional radiation pattern and 1 dBi gain. The Z-Top is ideal for telemetry, monitoring and M2M deployments such as datalogging, vending, gaming, kiosks where an external antenna should attract as little attention as possible or where the antenna is deployed marginally above the eye-line. The Z-Top is available in a black or white radome.

Check datasheet or table below for various part number ordering options.

The BUF2400 is a ½ wave dipole for fixed and portable wireless devices. Supporting the 2.4 GHz frequency, the BUF2400 is mounted using a captive part and connected to the radio using a U.FL connector. Ideal for applications where an external bulkhead connector is not required, the BUF2400 provides a neat WLAN and Bluetooth antenna solution.

Check datasheet or table below for various part number ordering options.